top of page

Lithium-ion batteries from JMT, high-tech for your motorcycle.


Batteries of the latest generation recognizable on the red case cover.


Spacer (S)

The battery is equipped with one or more spacers, which are glued underneath the battery with the supplied adhesive tape, so that the battery fits exactly into the battery box.


Waterproof (W)

The battery is completely watertight and does not take any damage when the motorcycle is cleaned with high pressure.


Indicator (I)

All batteries are equipped with a battery indicator.

Just press the test button. If all 3 blue LEDs light up, the battery is full (ful) charged. If only 2 LEDs are lit, it is only half (med) charged. At the latest when only one LED is lit (low), the battery must be charged.


Replacing a standard lead-acid battery with a JMT lithium-ion battery can save up to 5 kg of weight without any significant effort.


The following advantages speak for JMT lithium-ion batteries:

- approximately 1/3 of the weight of the comparable lead-acid battery

- unbeatable ratio of cost / weight savings

- can be installed in any position, as no acid

- does not contain heavy metals

- balanced discharge / charge of all cells by balancer

- Quick charge with high charging current possible (up to 90% in 6 min)

- very low self-discharge (max 5% per month)

- even at high temperatures still good performance up to 60 ° C

- safe technology and long service life


Due to the specific properties, lead-acid batteries can only use 30% of their capacity,

While nearly 100% of the capacity can be used with lithium-ion batteries.


For this reason, the lithium versions of the JMT batteries for the same starting power require only 1/3 the capacity of a comparable lead-acid battery.

An even charge state of all cells is also ensured by a built-in processor ("balancer").

The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the aid of adapters.

The connections are also identical, which means that the battery can be replaced in just a few minutes without further adjustments.


Please note that only suitable chargers may be used for charging. We recommend JMP chargers.

The maximum recommended charging currents can be found in the technical data below



Under no circumstances may chargers be used to try to desulphate deep-discharge batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charge.

The maximum charge voltage of 14.9 volts must never be exceeded. There is a risk of explosion.


The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.



JMT lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in manufacturing.

As a result, they can neither rise nor explode in flames during normal operation.

The technology and the manufacturing process ensure the highest safety standard for lithium batteries.



- 12 V maintenance-free lithium-ion battery

- Charge current recommended 1.5 A

- maximum charging current for quick charge 15 A


Comparable in dimensions and connections with:

Yuasa manufacturers number




  • Voltage :   12v
    Capacity :   3 Ah (10 Std)
    Capacity :   36 Wh
    Type :   Lithium
        Maintenance free
    Manufacturer claimed CCA :   180 A
    SAE as measured by JMP battery tester :   260 A
    DIN as measured by JMP battery tester :   235 A
    EN as measured by JMP battery tester :   145 A
    Length :   150 mm
    Width :   65 mm
    Height :   92
        106 mm
    Weight (including acid) :   0.616 kg
    Terminal connection :   Front
        from above
    Positive terminal :   Front left
    Negative terminal :   Front right
    Breather hose :   Without
    Manufacturer :   JMT
bottom of page