top of page

Lithium-ion batteries of JMT, Hightech for your motorcycle. 

The latest generation batteries recognizable by the red cover. 

Spacer (S) 
Battery is equipped with one or more spacers which are taped with adhesive tape under the battery so that the battery fits exactly into the battery box. 

By replacing a standard lead-acid battery with a lithium-ion battery JMT up to 5 kg in weight can be saved, without any appreciable effort. 

Following advantages speak for JMT lithium-ion batteries: 
- Approximately 1/3 of the weight of comparable lead-acid battery 
- Unbeatable ratio of cost / weight saving 
- Because in each position can be installed no acid 
- Contains no heavy metals 
- Balanced discharge / charge of all cells by Balancer 
- Fast charging with high charging current (up to 90% in 6 min) 
- Very low self-discharge (max. 5% per month) 
- Even at high temperatures still good performance up to 60 ° C 
- Safe technology and high durability 

Lead-acid batteries can be used only 30% of their capacity due to the specific properties, 
while nearly 100% of the capacity can be used in lithium ion batteries. 

For this reason, lithium batteries JMT versions of the same for the starting power need only 1/3 of the capacity of a comparable lead-acid battery. 
A steady state of charge of all the cells is also ensured by a built-in processor ("balancer"). 
The dimensions of the lithium-ion batteries by using adapters correspond to the dimensions of the original lead-acid batteries. 
Even the connections are identical, so the battery can be replaced without additional adjustments in a few minutes. 

Please note that the shop only suitable chargers may be used. We recommend JMP chargers. 
The maximum recommended charging currents please refer to Technical Data below 

Under no circumstances chargers may be used that attempt to desulfate deeply discharged batteries under 10 volts with a voltage of more than 14.9 volts, before they begin the actual charge. 
The maximum charging voltage of 14.9 volts may be exceeded under any circumstances. Risk of explosion. 

The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius. 

JMT use lithium-ion batteries as a cathode material iron phosphate (LiFePO4) and lithium-polymer using the method of manufacture. 
This allows them to rise even explode either in flames during normal operation. 
The technology and the manufacturing process ensure the highest safety standards for lithium batteries. 

- 12 V maintenance-free lithium-ion battery 
- Recommended charging current 5 A 
- Maximum charge current for fast charging 40 A 

Comparable in dimensions and connections with: 
Yuasa Manufacturer Part Number 


  • Voltage :   12v
    Capacity :   7.0 Ah (10 Std)
    Capacity :   84 Wh
    Type :   Lithium
    Activated :   Yes
    Manufacturer claimed CCA :   420 A
    Manufacturers Testing Standard :   SAE
    SAE as measured by JMP battery tester :   515 A
    DIN as measured by JMP battery tester :   475 A
    EN as measured by JMP battery tester :   290 A
    Length :   150 mm
    Width :   65 mm
    Height :   130 mm
    Weight (including acid) :   1.4 kg
    Acid Pack included :   No
    Terminal connection :   from above
    Positive terminal :   Front left
    Negative terminal :   Front right
    Breather hose :   Without
    Manufacturer :   JMT
bottom of page